Dr. Mohammad Hossain Shariare

Full Time Faculty
Associate Professor

PhD in Pharmaceutical Science & Technology, University of Bradford, UK

Phone: +880-2-55668200 Ext: 1953
Email: mohammad.shariare@northsouth.edu
Office:SAC 1058

Curriculum Vitae

Dr. Mohammad Shariare is working as an Associate Professor in the Department of Pharmaceutical Sciences, NSU. Mohammad Shariare did his PhD in Pharmaceutical Technology from University of Bradford, UK. The title of his PhD dissertation was "The rational design of drug crystals to facilitate particle size reduction". Before that he did his undergraduate degree from Department of Pharmacy, Jahangirnagar University, Dhaka, Bangladesh. His research interest area is advanced drug delivery system (Nanotechnology, inhalation drug delivery system etc.).

Full research paper:

  • M. Kazi, Mohammad H. Shariare, Mshaan al-bgomi, muhammad delwar hussain and fars k alanzi. Simultaneous determination of curcumin (cur) and thymoquinone (thq) in lipid based self-nanoemulsifying systems and its application to the commercial product using UHPLc-uv-vis spectrophotometer. Current pharmaceutical analysis (accepted), 2017.
  • Zerin T.Rushmi, Nasrin Akter, Rabeya J.Mow, Merina Afroz, Mohsin Kazi, Marcel de Matas, Mahbubur Rahman, Mohammad H.Shariare. (2017). The impact of formulation attributes and process parameters on black seed oil loaded liposomes and their performance in animal models of analgesia. Saudi Pharmaceutical Journal, 25: 404 -412.
  • Shariare, M.H., Blagden, N., De Matas, M., Leusen, F.J.J. & York, P. (2012). Influence of solvent on the morphology and subsequent comminution of ibuprofen crystals by air jet milling. Journal of Pharmaceutical Science. 101 (3): 1108-1119. http://www.ncbi.nlm.nih.gov/pubmed/22161641.
  • Shariare, M.H., De Matas, M., Shao, Q. & York, P. (2011). The impact of material attributes and process parameters on micronisation of lactose monohydrate. International Journal of Pharmaceutics. 408: 58-66. http://www.ncbi.nlm.nih.gov/pubmed/21295125.
  • Shariare, M.H., De Matas, M. & York, P. (2012) Effect of crystallisation conditions and feedstock morphology on the aerosolization performance of micronised salbutamol sulphate. International Journal of Pharmaceutics. 415: 62-72. http://www.ncbi.nlm.nih.gov/pubmed/21683128.
  • Shariare, M.H., De Matas, M., Leusen, F.J.J., York, P. & Anwar, J. (2011). Prediction of the mechanical behaviour of crystalline solids. Pharmaceutical Research; 29(1):319-31, http://www.ncbi.nlm.nih.gov/pubmed/21845506.
  • Shariare, M.H., De Matas, M. & York, P. (2010). Influence of crystallisation conditions on the morphology of Ibuprofen crystals. Journal of Pharmacy and Pharmacology, 62 (10), 1337. http://onlinelibrary.wiley.com/doi/10.1111/j.2042-7158.2010.01178.x/pdf
  • A.L. Marzan, R. Tabassum, B. Jahan, M.H. Asif, M. Kazi, M. De Matas, M.H. Shariare*. Preparation and characterization of stable nanosuspensions for dissolution rate enhancement of Furosemide: A QbD Approach. Current Drug Delivery (under review), 2017.
  • M.H. Shariare*, S. Sharmin, I. Jahan, H.M. Reza. (2016). The impact of process parameters on carrier free paracetamol nanosuspension prepared using different stabilizers by antisolvent precipitation method. Journal of Drug delivery Science and Technology (under review), 2017.
  • K. Afnan, S. B. Haque, T. Tasnim, M. Kazi, H. M. Reza, M. H. Shariare. Formulation and Optimization of Epigallocatechin Gallate (EGCG) Nano Drug Delivery System using QbD Approach (Manuscript in prep.), 2017.
  • A. Arefin, T. Afsana, A. Rahman, N. Salauddin, T. Islam, H. Saha, M. Kazi & M.H. Shariare*. Preparation and Characterization of Graphene Oxide Nanoparticle Based Suspension for Optimized Drug Delivery (Manuscript in prep.), 2017.


Conference paper:

Oral Presentation

  • “A rapid method for predicting the mechanical behaviour of active pharmaceutical ingredients”, Presented at CMP seminar, University of Bradford, UK, March, 2011.
  • “Towards a rapid method for predicting the mechanical behaviour of active pharmaceutical ingredients”, Presented at APS Materials by design’, University of Nottingham, UK, June 22-23, 2011.
  •  “Milling to achieve the appropriate particle properties for inhalation, how can we rank or predict?” Presented at APS Inhalation’ University of Bath, UK, July 4-6, 2011.

”Best poster presentation award from the selected abstract”

 

Poster presentation

  • Formulation and Optimization of Epigallocatechin Gallate (EGCG) Nano Drug Delivery System Using QbD Approach. Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) Annual Meeting and Exposition, USA. 2016.
  • Preparation and Characterization of Graphene Oxide Nanoparticle Based Suspension for Optimized Drug Delivery. Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) Annual Meeting and Exposition, USA. 2016.
  • Formulation and Optimization of Furosemide Nanosuspension by Anti-solvent Precipitation. Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) Annual Meeting and Exposition, USA. 2016.
  •  “Oral Delivery of Insulin using Nano-emulsion Approach' Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) annual Meeting and Exposition, 2015.
  • 'Preparation and characterization of Gliclazide Nanosuspension' Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) annual Meeting and Exposition, 2015.
  • 'Preparation and characterization of Black Seed Oil loaded liposomes' Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) annual Meeting and Exposition, 2014.
  • 'PREPARATION AND CHARACTERIZATION OF CARRIER FREE PARACETAMOL NANOSUSPENSION' Accepted for presentation at American Association of Pharmaceutical scientists (AAPS) annual Meeting and Exposition, 2014.
  • “Influence of solvent properties on the morphology of Ibuprofen crystals and its impact on particle size reduction”. Presented at FIP Pharmaceutical Sciences world congress in association with American Association of Pharmaceutical scientists (AAPS), 2010.
  • Effect of crystallisation conditions and feedstock morphology on the aerosolization performance of micronized salbutamol sulphate delivered by DPI. Drug delivery to Lung (DDL) Conference, Edinburgh, UK, 2010.
  • The impact of morphology and process parameters on micronisation of salbutamol sulphate. EUPAT 4, Finland, 2010.
  • Influence of crystallisation conditions on the morphology of Ibuprofen crystals. Presented at UKPharmSci conference, Nottingham, UK, 2010.
  • “Particle process optimisation for enhanced respiratory drug delivery”. Presented at American Association of Pharmaceutical scientists (AAPS) conference, 2009.
  • Particle optimisation for enhanced respiratory drug delivery. Presented at: BPC conference, UK, 2009.

Ongoing Research:

  • Liposomal drug delivery of Aphanamixis polystachya leave extracts and therir performance in animal model
  • Optimization of furosemide nanosuspension using design of experiments (DOE) and its permeability study in mice model
  • Development and optimization of self nano-emulsifying drug delivery system (SNEDDS) of furosemide
  •  Development and optimization of self nano-emulsifying drug delivery system (SNEDDS) of Curcumin
  • Development and optimization of solid lipid nanoparticles of gliclazide
  • Best poster presentation award from the selected abstract, Presented at ‘APS Inhalation’ University of Bath, UK, July 4-6, 2011

  • NSU Research Grant of $5000 for Fiscal year 2016-17

 

  • PhD in Pharmaceutical Sciences - University of Bradford, UK,  (2011)                                                              
  • Bachelor of pharmacy - First Class, Jahangirnagar University, Bangladesh (2005)
  • H.S.C. – First class, Dhaka Residential Model College, Bangladesh, (1998)
  • S.S.C. – First class, Dhaka Residential Model College, Bangladesh, (1996)

Associate Professor                                                                                            March, 2017 - Present

Department of Pharmaceutical Sciences                                                                                  

North South University


Assistant Professor                                                                                               Jan, 2013 - Feb, 2017

Department of Pharmaceutical Sciences                                                                                  

North South University

 

Teaching (Lab) Assistance

University of Bradford, UK                                                                                   2009 – 2011

NOVO Healthcare and Pharma Ltd., Dhaka, Bangladesh            July 2005 – Aug 2007

Senior Development & Production Pharmacist

  • Development and production of several drugs in pellet dosage forms using biodegrable polymers and matrix systems.
  • Physical Pharmacy
  • Pharmaceutics
  • Pharmaceutical Technology
  • Pharmaceutical Engineering
  • Advanced Pharmaceutical Analysis
  • Member of American Association of Pharmaceutical Scientist (AAPS), USA.
  • Member of Academy of Pharmaceutical Sciences (APS, UK)
  • Registered Pharmacist (A grade) of Bangladesh
  • Biodegradable and biocompatible Nanoparticles of Phytoconstituents
  • Nano drug delivery system- Particular interest in poorly soluble drugs and targeted drug delivery systems
  • Inhalation drug delivery system
  • Sustain and controlled release drug delivery system
  • Fundamentals of material science - particularly morphology, structure and mechanical properties of drug crystals
Full Time Faculty
Associate Professor

PhD in Pharmaceutical Science & Technology, University of Bradford, UK

Phone: +880-2-55668200 Ext: 1953
Email: mohammad.shariare@northsouth.edu
Office:SAC 1058

Curriculum Vitae